Finished up the rear shock towers. Notice the plate that will be welded on to the tower for the rollcage mount.
Two more plate for the roll cage.
The cage is making a bit of progress.
Cross bar between the rear shock towers.
And now tied into the diff mount.
And the main hoop to the shock tower getting roughed in.
Starting on the foot well protection.
Some more bars added to the cage.
Not much left to do on the rear of the cage!
Below you can see how we tried to stiffen up where the subframe attaches. Before that bar was attached you could really see that part of the floor move around while we were wrestling with the subframe.
Frank also got started on the door bars on the passenger side.
And the foot well protection bars are finished up.
Finishing off the last bars, the driver side door bars.
Its hard to tell from the picture but we had the door bars on the driver side pertrude out into the door to give the driver room.
The vertical bar in the middle will become part of a jack pad.